500Hz Brushless Motor Drive Controller Manual Protection 30 Speed 180rpm 2500rpm 3 Pole 143*80*33 24V 48V 60V Driver for BLDC

• Task: Adjust
• Structure: Combination
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Protection, Monitoring, Measurement
• Certification: CCC, ISO: 9001, CE
• Model NO.: BL4815L
• Condition: New
• Customized: Non-Customized
• Material: Aluminum Alloy
• Max Current: 35A
• Application: Brushless DC Motor Controller
• Rated Current: 15A
• Transport Package: EPE Foam + Carton + Pallet
• Specification: 143*80*33
• Trademark: BG MOTOR
• Origin: Zhejiang, China
• Production Capacity: 20000PCS /Year

Product Description

 

BL2415
Name	NOTE
DC+/DC-	DC voltage input (DC 24V~DC 84V)
U,V,W	Motor Phase Line
Hu,Hv,Hw	Hall signal
VCC	Hall Power +
SV	External speed regulation. suspended when using internal speed regulation.
F/R	Direction, suspended or high at normal times positive turn, low level reverse.
EN	Control signal enable high level stop, low level run
BRK	Brake, low power normally for normal operation, high level shutdown
ALARM	Alarm signal output

 

Electrical Specifications
Projects	Minimum value	Typical values	Maximum value
Input voltage	24	48	60
Output current	-	6	35
Apply Motor Speed (rpm)	-	-	20000
Hall Signal Voltage (V)	4.5	5	5.5
Hall Drive Current (mA)	-	20	-
External governor (KΩ)	-	10	-
Over-current protection function	Overcurrent protection occurs when the current exceeds the operating current setting value and lasts a set time
Overpressure	An overvoltage protection occurs when the voltage exceeds 30 V
undervoltage	undervoltage protection when voltage is below 10 V
Hall anomaly	Hall signal anomaly
We can also customize products according to customer requirements.

 

Name	Note
DC+/DC	DC voltage input (DC 10V~DC 24V)
U,V,W	Motor Phase Line
Hu,Hv,Hw	Hall signal
VCC	Hall Power +
SV	External speed regulation. suspended when using internal speed regulation
F/R	Direction, suspended or high at normal times positive turn, low level reverse
EN	Control signal enable high level stop, low level run
BRK	Brake, low power normally for normal operation, high level shutdown
ALARM	Alarm signal output

 

^Signal	^Termina	^Content
^Power supply Input	DC+	DC power input positive. (Voltage range DC24~60 V)
	DC-	DC power input negative electrode
^Motor ^Hall	W	DC brushless motor W phase.
	V	DC brushless motor V phase.
	U	DC brushless motor U phase.
^Signal ^Connection	REF-	dc brushless motor hall signal ground wire.
	HW	Hall Signal HW. for DC Brushless Motor
	HV	Hall Signal HV. for DC Brushless Motor
	HU	Hall Signal HU. for DC Brushless Motor
	REF+	dc brushless motor hall signal power cord.
Control Signal	SV	1 external speed regulating potentiometer ;2 external analog signal speed regulating input ;3 PWM speed regulating signal input.
	COM	common port (0 V reference level).
	F/R	When the F/R end is disconnected from the COM end or when the high level input is
	EN	The motor stops slowly when the EN and COM ends are disconnected or high level input, and the motor runs when short connection or low level input.
	BRK	BRK end and COM end disconnect or high level input timing brake stop, short connection or low level input when motor running.
Output signal	SPEED	corresponding to the running speed of the motor and output the corresponding pulse The formula is: N(rm)=(F/P)x60/3 F:output pulse frequency;Hz:P: motor pole logarithm:N: motor speed 2ms Example:Motor 4 poles F=sec/2msF=500Hz N(rm)=(500/4)x60/3=2500
	ALM	Motor or drive control fault signal output signal, normal 5 V, when failure level is 0 V..

 

Alarm  indication	State description	Countermeasures
Red light flashes 2 times	Overpressure alarm	alarmCheck voltage
Red light flashes 3 times	Overflow Alarm for Power Tube	Determine whether the selection is correct
Red light flashes 4 times	Over-current alarm	Check P-sv setting, proofread motor parameters. or increase the acceleration time.
Red light flashes 5 times	undervoltage alarm	Check the supply voltage and check whether the supply power meets the condition of 1.5 times greater than the motor power
Red light flashes 6 times	Hall alarm	Please check to see if the motor wiring is secure.
Red light flashes 7 times	Stopping alarm	Make sure the motor load is too large
Red light flashes 8 times	More than two alarms	Hall and shutoff alarm as a common condition. Adjust the P-sv to the maximum when the motor can not speed.

Established in 1994, Ningbo BG Motor Factory is a professional manufacturer of brushless DC motors, brushed DC motors, planetary gear motors, worm gear motors, Universal motors and AC motors. We have a plant area of 6000 square meters, multiple patent certificates, and we have the independent design and development capabilities and strong technical force, with an annual output of more than 1 million units. Since the beginning of its establishment, BG motor has focused on the overall solution of motors. We manufacture and design motors, provide professional customized services, respond quickly to customer needs, and actively help customers to solve problems. Our motor products are exported to 20 countries, including the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. Sun, has more than 40 years of experience in motor technology, and our other engineers also have more than 15 years of experience, and 60% of our staff have more than 10 years of experience, and we can assure you that the quality of our motors is top notch.
The products cover AGV, underwater robots, robots, sewing machine industry, automobiles, medical equipment, automatic doors, lifting equipment, industrial equipment and have a wide range of applications.
We strive for excellence in the quality of each product, and we are only a small and sophisticated manufacturer.
Our vision: Drive the world forward and make life better!

 

1. How can I use the driver for the first time?
A: After correctly connecting the power line, motor line, and Hall line, the external potentiometer slowly accelerates, and the motor rotates correctly, and then test the enable, direction and other functions in turn. If you are unfamiliar with this product, you should test it for the first time before installing it for actual use.

2. What is the impact of reverse power connection?
A: Will burn the drive immediately.

3. What is the highest voltage of the upper control signal V?
A: The maximum voltage of the speed control signal is 5V, exceeding this voltage will cause the drive to burn.

4. After the driver has been working for a long time, the housing is relatively hot, is it normal?

A: Normally, under normal temperature, working the shell for a long time to 90 degrees will not affect the performance.

5. The power indicator is on, but the motor does not rotate and shakes. What is the reason?
A:It may be that there is an error between the phase line and the Hall line. Please follow the motor manual and reconnect the power to test.

6. Can I adjust the speed of my motor to 6000 with this driver?
A:The maximum speed of the brushless motor is determined by the parameters of the motor itself, and the driver can control the motor speed from 0 to the highest speed.

7. I already have a motor on my hand. How do I connect it after purchasing this driver?
A:You must first determine the definition of the phase line and Hall line of the motor on your hand before wiring. If you are not sure, you need to ask the motor manufacturer. Incorrect wiring will cause damage to the drive.

8. Can I add some functions to this drive or develop new products?
A: Yes, please contact our company.